-
Our Chainstay protectors are sized to fit most tubes and wrap tight and clean around the tube. Held in place by our super strong adhesive. Offers the ultimate protection against chain slap, sticks and rocks.
-
Protect your expensive cranks against rocks and shoe rub. Many crank protectors are manufactured from polyurethane which is too soft for crank protectors and can rub through on just one ride! Module Crank Shield crank protectors are made from the same material used to protect motorcycles and snowmobiles and offer offer 12 mils of tough PVC protection. With just the right amount of flexibility and super strong adhesive, our protectors fit to your cranks and stay in place.
-
Module domed downtube protectors offer 1.35 mm of tough polyurethane protection for your downtube. Lite Shield protectors offer 12 mils of tough PVC protection. Module protectors offer super tough protection against rocks, sticks, debris and even that nasty tailgate carrier. Apply them at the bottom of the downtube for protection against rocks and sticks. Apply them at the top of the downtube just below your head tube junction to protect your frame and graphics against damage when transporting your bike in the back of a truck bed. We also offer full kits for maximum coverage and protection for your frame against the elements. Available in multiple graphic designs and and clear!
MADE IN THE USA
-
Stay clean! Module fenders keep the muck and grime off your face and clothes! They also help keep grime away from your lower headset bearings and out of the impossible to clean holes in your fork arch.
-
Module Fork Protectors offer tough PVC protection for your fork lowers. Made from the same material used to protect motorcross bikes, our Fork Protectors protect your fork lowers from rocks, sticks and other trail debris.
-
Module domed frame protectors are thicker than other frame protectors and raise the housing above the paint and away from the frame for best protection. We offer two types - our Mini Shields are .85 inches circles - stick them anywhere to protect against cable housing and brake line rub. Our NEW Frame Shields are 2" x 1 3/8" and offer more protection anywhere you need it. They also work great on fork lowers! Available in carbon and clear graphics!
-
Module manufactures three types of frame tapes which are commonly referred to as Heli tape. Our basic Paint Shield Heli Tape is a high quality 9.4 mil polyurethane frame protection tape designed to protect your frame where you don't need thicker protectors. For thicker protection, check out our 14 mil thick Heli Tape PLUS whic is 30% thicker than our standard Heli Tape for extra protection against trail and road hazards! Heli Tape PLUS works great for the downtube and other places you more protection with better impact absorption. Finally, we offer our more abrasion resistant Lite Shield product in 2" and 1.6" rolls. The Lite Shield material can be layered for thicker protection where needed!
-
If you push hard, you inevitably end up in the dirt! Protect your carbon and alloy bars against rocks, sticks and abrasive dirt! Module Handlebar Shields are made from the same material used to protect motorcycles and snowmobiles and offer offer 12 mils of tough clear PVC protection. With just the right amount of flexibility and super strong adhesive, our protectors fit to your bars and stay in place.
-
-
Module frame kits give you multiple modular pieces to fit together as needed for maximum coverage and protection for your frame against the elements. Our domed protectors offer 1.25 mm of tough polyurethane protection for your downtube. Lite Shield and Lite Shield PLUS protectors offer 12-19 mils of tough PVC protection. Module protectors offer super tough protection against rocks, sticks, debris and even that nasty tailgate carrier.
-
Module tubeless tapes are designed for serious riders on Mountain, Gravel and Ebikes. We offer three different options, each optimized for specific applications.
Most tubeless tapes use a more rigid material which does not conform well to curves and ridges on your rim. This can cause small passageways between the tape and the rim which allows air to bleed out of your tire and can make your rim hard to seal.
The Module Red Quickseal Tubeless Tape is made of a more pliable material which allows the material to conform better to the rim and thu seal your rim quicker and easier with less air loss when setting up. Our Blue Tubeless Tape offers very good elasticity, light weight and excellent durability and is designed for rims which have a flatter rim bed profile. We combined the Quickseal Red Tape and our Blue Tape to create to create the Quickseal Purple System (Patent Pending) for tubeless setups running tighter fitting tires or perfomance inserts such as CushCore.
|
